نمایش نتایج جستجو برای
کلمات کلیدی: Composites
موارد یافت شده: 74
1 - Effect of Diffusion on the Ultimate Axial Load of Complex-Shaped Al-SiC Samples: A Molecular Dynamics Study (چکیده)2 - Collaborative adsorption and photocatalytic degradation of high concentration pharmaceutical pollutants in water using a novel dendritic fibrous nano-silica modified with chitosan and UiO-66 (چکیده)
3 - Enhancing energy carrier gas storage: Novel MOF-decorated carbons with high affinity toward methane and hydrogen (چکیده)
4 - Diffusion effect on the cohesive zone model of SiC/Al interface using atomistic simulations (چکیده)
5 - Development of a phase-change material-based soft actuator for soft robotic gripper functionality: In-depth analysis of material composition, ethanol microbubble distribution and lifting capabilities (چکیده)
6 - Effect of Inter-Cavity Spacing and Heat Treatment in Friction Stir Processing/Welding (FSP/FSW) Al7075 Composites Containing Al2O3 and Graphene Nanomaterials using Charpy Impact Test (چکیده)
7 - Interfacial structure-property relationship in a carbon nanotube-reinforced aluminum alloy matrix composite fabricated by an advanced method (چکیده)
8 - An investigation on the effect of Al4C3 on microstructure and mechanical properties of carbon nanotube reinforced aluminum composite (چکیده)
9 - Molecular Dynamics Study of Interdiffusion for Cubic and Hexagonal SiC/Al Interfaces (چکیده)
10 - Optimization of adsorption parameters using central composite design for the removal of organosulfur in diesel fuel by bentonite-supported nanoparticle NiO-WO3 (چکیده)
11 - Cellulose-Based Hybrid Composites Enabled by Metal Organic Frameworks for CO2 Capture: The Effect of Cellulosic Substrate (چکیده)
12 - Erosion-corrosion of electrodeposited superhydrophobic Ni-Al2O3 nanocomposite coatings under jet saline-sand slurry impingement (چکیده)
13 - Experimental analysis on tensile strengthening properties of steel and glass ber reinforced inorganic matrix composites (چکیده)
14 - The enhanced mechanical properties and strain-hardening capability of CNT/Al composites achieved by heterogeneous micro-laminated architecture (چکیده)
15 - A novel method for estimation of stress concentration factor of central cutouts located in orthotropic plate (چکیده)
16 - Hybrid mathematical modeling and multi‐objective optimization of mechanical properties of green composites based on starch and modified rice straw fillers (چکیده)
17 - Geometrically nonlinear thermohermo-mechanical analysis of grapheneraphene-reinforced moving polymer nanoplates (چکیده)
18 - Metal−organic framework-based sorbents in analytical sample preparation (چکیده)
19 - On the influence of resin pocket area on the failure of tapered sandwich composites (چکیده)
20 - A New Approach to Improve IPMC Performance for Sensing Dynamic Deflection: Sensor Biasing (چکیده)
21 - Delamination analysis in composite root of a carbon-layer rein-forced wind turbine blade (چکیده)
22 - A novel approach towards prediction of subsurface damage during machining metal matrix composites (چکیده)
23 - Improving the microstructural and mechanical properties of in-situ zirconia-mullite composites by optimizing the simultaneous effect of mechanical activation and additives (چکیده)
24 - Machining metal matrix composites: novel analytical force model (چکیده)
25 - On tool–workpiece interactions during machining metal matrix composites: investigation of the effect of cutting speed (چکیده)
26 - On modeling the deformations and tool-workpiece interactions during machining metal matrix composites (چکیده)
27 - A Physics-Based Model for Metal Matrix Composites Deformation During Machining: A Modified Constitutive Equation (چکیده)
28 - Analysis of tool-particle interactions during cutting process of metal matrix composites (چکیده)
29 - On modeling tool performance while machining aluminum-based metal matrix composites (چکیده)
30 - Ni–Cr matrix composites reinforced with nano- and micron-sized surface-modified zirconia: Synthesis, microstructure and mechanical properties (چکیده)
31 - Heterogeneous Catalysis by Polyoxometalates in Metal-Organic Frameworks (چکیده)
32 - A novel approach to the uniformly distributed carbon nanotubes with intact structure in aluminum matrix composite (چکیده)
33 - Enhancement in mechanical properties of multiwalled carbon nanotube‐reinforced epoxy composites: Crosslinking of the reinforcement with the matrix via diamines (چکیده)
34 - Seismic Behavior of High-Performance Fiber-Reinforced Cement Composites Beam-Column Connection with High Damage Tolerance (چکیده)
35 - Microstructural and Diametral Tensile Strength of Zirconia-Mullite Composites (چکیده)
36 - Study on single and binary catalytic systems of pyridine‐imine catalysts based on nickel and iron in synthesis of reactor blends and low‐density polyethylene nanocomposites (چکیده)
37 - Remarkable enhancements in mechanical properties of epoxy composites through double reinforcing structure: Integrated structure of carbon fiber‐carbon nanotube instead of conventional reinforcing methods (چکیده)
38 - Experimental analysis of energy absorption capability of thin-walled composite cylindrical shells by quasi-static axial crushing test (چکیده)
39 - In-situ fabrication of Al(Zn)-Al2O3 graded composite using aluminothermic reaction during hot pressing (چکیده)
40 - Multiscale Mechanical Modeling of Epoxy-Graphite Nanoplatelet Composites Using Asymptotic Homogenization Method (چکیده)
41 - Mechanical (tensile, hardness and fatigue ) behavior of the Al-Al 2 O 3 p composites fabricated by stir casting method (چکیده)
42 - Synthesis of PE/MWCNT Nanocomposites Through in-situ polymerization using Mixture of Pyridilimine [N, N] catalysts based on Ni & Fe (چکیده)
43 - Recent Advances in Crystal Engineering from Nanoscience Views: A Brief Review (چکیده)
44 - Nonautoregressive Nonlinear Identification of IPMC in Large Deformation Situations Using Generalized Volterra-Based Approach (چکیده)
45 - Effect of resin pocket area on the mechanical strength and crack propagation of tapered sandwich composites (چکیده)
46 - Effect of powder reactivity on fabrication and properties of NiAl/Al2O3composite coated on cast iron using spark plasma sintering (چکیده)
47 - Microstructure and corrosion behaviour of plain carbon steel–B4C composite produced by GTAW method in 3?5 wt-%NaCl solution (چکیده)
48 - A Rapid Synthesis of Silver Nanoparticles Using a Radical Initiator under UV Light and Evaluation of Their Antibacterial Activities (چکیده)
49 - An Investigation of Tribological Properties of Al-Al2O3 Composites Fabricated by Spark Plasma Sintering Method (چکیده)
50 - Improvements in fatigue life of amine-functionalized multi-walled carbon nanotube-reinforced epoxy composites: Effect of functionalization degree and microwave-assisted precuring (چکیده)
51 - Improvements in mechanical properties of multi-walled carbon nanotube-reinforced epoxy composites through novel magnetic-assisted method for alignment of carbon nanotubes (چکیده)
52 - Improvements in fatigue life of amine-functionalized carbon nanotube-reinforced epoxy composites: effect of microwave-assisted procuring (چکیده)
53 - Microstructural analysis and mechanical properties of aluminum matrix nanocomposites reinforced with uncoated and Cu-coated alumina particles (چکیده)
54 - Fabrication of multi-walled carbon nanotube–carbon fiber hybrid material via electrophoretic deposition followed by pyrolysis process (چکیده)
55 - Synthesis and characterisation of dental composite materials reinforced with fluoroapatite–mullite glass–ceramic particles (چکیده)
56 - Evaluation of process behavior and crystallite specifications of mechano-chemically synthesized WC–Al2O3 nano-compositesEvaluation of process behavior and crystallite specifications of mechano-chemically synthesized WC–Al2O3 nano-composites (چکیده)
57 - Fabrication of Aluminium-Carbon nanotube Composites Via Spark Plasma Sintering Method (چکیده)
58 - Influence of strain rate on the toughening effect of CaCO3 in polypropylene/CaCO3 composites (چکیده)
59 - Enhancement of mechanical properties of amine-functionalized mwcnt/epoxy composites: effect of amine moieties (چکیده)
60 - Non-linear analysis of fiber-reinforced open conical shell panels considering variation of thickness and fiber orientation under thermo-mechanical loadings (چکیده)
61 - Analysis of the sedimentation process in reactive polymeric suspensions (چکیده)
62 - Effects of density on the Bending and compressive properties of closed-cell aluminum foam (چکیده)
63 - Ceramic Particles Stabilized Aluminum Foams Produced by Melt Gas Injection (چکیده)
64 - Fabrication of Aluminum–Graphite Composites by SPS Method (چکیده)
65 - Impact toughness and microstructure of continuous medium carbon steel-bar reinforced cast iron composite (چکیده)
66 - Delamination detection in laminated composite beams using hybrid elements (چکیده)
67 - Evaluation of Characteristics of Interfacial Phases Produced in Al/Ni3Al Composite during Manufacturing (چکیده)
68 - Similitude requirements and scaling laws for flutter prediction of angle-ply composite plates (چکیده)
69 - Incorporating Aspect Ratio in a New Modeling Approach for Strengthening of MMCs and its Extension from Micro to Nano Scale (چکیده)
70 - Influence of H and N insertion on the magnetostriction and thermal expansion of YFe10V2Zx (Z=N, H) compositions (چکیده)
71 - Low velocity impact analysis of laminated composite plates using a 3D elasticity based layerwise FEM (چکیده)
72 - Investigation the Impact Response of Fiber Reinforced Composites with a Hole (چکیده)
73 - Identifying Fracture parameters of polymer composites (چکیده)
74 - Buckling of Perforated Plates Repaired with Composite Patches (چکیده)
